Zoom MRS-1044 Reference, [Recorder], Press the [EXIT] key, Press the [ENTER] key, 5.Press the [EXIT] key, 5.Press the [EXIT] key, 3.Press the [ENTER] key

Capturing the recorded contents of a track

2.Press one of the status keys (1 – 6, 7/8, 9/10) or use the dial to select the track to be captured.

NOTE

It is not possible to capture a track that has not yet been recorded.

3.Press the [ENTER] key.

The display will ask "CAPTURE SURE?"

4.To execute the Capture operation, press the [ENTER] key once again.

When the capture is completed, the display will indicate "SWAP," and you will be able to execute the Swap operation for that track.

5.Press the [EXIT] key.

You will return to the main screen.

HINT

If necessary, you can repeat steps 2 – 4 to capture multiple tracks.

NOTE

The captured data will be erased from the hard disk when the currently selected project is saved.

3.Press the [ENTER] key.

The display will ask "SWAP SURE?"

4.To execute the Swap operation, press the [ENTER] key once again.

The recorded data of the selected track will be exchanged with the previously captured recorded data. The recorded data of the selected track will be saved as capture data on the hard disk until the project is saved.

HINT

You can return to the previous state by immediately executing Swap a second time.

5.Press the [EXIT] key.

You will return to the main screen.

Reference

Swapping with the captured data

Here's how to swap (exchange) the captured data with the

current recorded data of a track.

1.In the main screen, press the [UNDO/REDO] key.

2.Press one of the status keys (1 – 6, 7/8, 9/10) or use the dial to select a track that was previously captured.

When a captured track is selected, the display will indicate

"SWAP."

[Recorder]

HINT

If you select a track that has not been captured, the display will indicate "CAPTURE."

ZOOM MRS-1044

45