Finding a desired location (Scrub/Preview function)

[Recorder] Reference

use the cursor [E]/[R] keys to make the scrub playback length setting blink, and turn the dial.

You can select 40, 80, 120, 160, or 200 (ms) as the length

of scrub playback.

HINT

You can also use the cursor [Q]/[W] keys to change the scrub playback length.

3.If you want to change the direction of scrub playback, use the cursor [E]/[R] keys to make the scrub playback direction setting blink, and turn the dial.

If you select "TO," scrub playback will begin from an earlier point and end at the current location. If you select "FRM," scrub playback will begin from the current location (this is the default setting).

 

 

 

 

 

 

 

(Default setting)

 

 

 

Current location

 

 

Current location

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Scrub playback

 

 

 

 

Scrub playback

 

 

 

 

 

 

 

 

 

 

 

 

HINT

The scrub function playback will be affected immediately by any change you make to the scrub settings.

4.If you want to use the new scrub playback settings to find a location, use the cursor [E]/[R] keys to move the blinking area to the unit displayed at the right of the counter ("MS" for time display, or "TICK" for measure display).

Turn the dial to the left or right, and the current location will move backward or forward. For details on operating the Scrub/Preview functions, refer to the preceding item.

5.To exit the Scrub function, press the STOP [P] key.

You will return to the main screen.

Playing back repeatedly (A-B Repeat function)

A-B Repeat is a function that repeatedly plays back a desired region of the song. This is useful when you want to listen to the same region repeatedly.

1.Locate to the point at which you want to begin repeat playback, and press the [A-B REPEAT] key.

The [A-B REPEAT] key will blink, and the repeat start

location (point A) will be specified.

2.Locate to the point at which you want to end repeat playback, and press the [A-B REPEAT] key.

The [A-B REPEAT] key will change from blinking to

solidly lit, and the repeat end location (point B) will be

specified.

NOTE

If you specify a point B that is located earlier than point A, the region from points B → A will be played repeatedly.

HINT

•If you want to re-make the point A/B settings, press the [A-B REPEAT] key several times to make it go dark, and then repeat steps 1 – 2 once again.

•Point A/B settings can be made when the recorder is either stopped or playing.

3.To begin repeat playback, press the PLAY [R] key.

Repeat playback will begin when you press the PLAY [R] key while the [A-B REPEAT] key is lit. Even after pressing the STOP [P] key to stop playback, you can perform repeat playback again as many times as desired, as long as the [A-B REPEAT] key is lit.

4.To turn off repeat playback, press the [A-B REPEAT] key.

The [A-B REPEAT] key will go dark, and repeat playback

will be turned off.

NOTE

When the [A-B REPEAT] key goes dark, the programmed point A/B locations will be erased.

32

ZOOM MRS-1044