Project operations

NOTE

To execute the erasure, press the [ENTER] key. To cancel,

press the [EXIT] key. When the erase operation has been

• These screens are for display only, and contain no items

completed, you will return to the main screen.

that can be edited.

 

•The remaining recordable time is an approximation.

HINT

Duplicating a project (PROJECT COPY)

This operation copies a specified project that is saved on

the hard disk.

It is also possible to erase the currently loaded project. In this case, the lowest-numbered project will automatically be loaded after the erase operation has been completed.

NOTE

Once a project has been erased, it cannot be recovered. Use this operation with care.

Project name

Project number

1.When the above screen is displayed, turn the dial to select the copy-source project, and press the [ENTER] key.

A screen will appear in which you can specify the copy-

destination project number.

Copy-destination project number

2.Turn the dial to select the copy-destination project number, and press the [ENTER] key.

The display will ask "SURE?"

3.To execute the copy, press the [ENTER] key. To cancel, press the [EXIT] key.

When the copy operation has been completed, you will

return to the main screen with the copy-destination project

selected.

Erasing a project (PROJECT ERASE)

This operation erases the specified project from the hard disk. When the following screen is displayed, use the dial to select the project that you want to erase.

Project name

Project number

Editing the project name (PROJECT NAME)

This lets you edit the name of the currently loaded project. When the following screen is displayed, the character selected for editing will blink.

Use the cursor [E]/[R] keys to move the blinking area, and use the dial to change the character.

For details on the characters that can be used, refer to p.36.

HINT

The edited name of the project will be updated when the project is saved.

Protecting a project (PROJECT PROTECT)

This setting lets you write-protect the currently loaded project. When the following screen is displayed, use the dial to select one of the following two settings.

●OFF: Protect is turned off.

●ON: Protect is turned on. When protect is on, the following operations will be impossible.

•Editing or recording on the recorder

•Changing the V-take

•Editing a patch

•Recording or editing a rhythm pattern or the rhythm

[Project] Reference

ZOOM MRS-1044

87