Zoom MRS-1044 Track editing, Use the cursor, Use the cursor, [Recorder] Reference, ■Selecting the recording-destination V-take

Combining multiple tracks (Bounce function)

[Recorder] Reference

5.To return to the main screen, press the [EXIT] key several times.■Selecting the recording-destination V-take

By default, the result of the Bounce operation will be recorded on the V-take that is currently selected for the recording track(s). If you want to preserve the contents of the recording track(s), you can use the following procedure to change the recording-destination V-take.

HINT

For details on V-takes, refer to p.35.

1.In the main screen, press the [PROJECT/UTILITY] key.

The display will indicate "PROJECT."

2.Use the cursor [E]/[R] keys to make the display read "UTILITY BOUNCE," and press the [ENTER] key.

3.Use the cursor [E]/[R] keys to make the display read "BOUNCE REC TAKE," and press the [ENTER] key.

The currently selected recording-destination V-take will be displayed.

•CURRENT : The bounce result will be recorded on the V-take currently selected for the recording track.

•1 – 10 : The bounce result will be recorded on the V- take of the number you specify here.

4.Turn the dial to specify the recording-destination V- take (CURRENT or 1 – 10).

5.To return to the main screen, press the [EXIT] key several times.

Track editing

The audio data recorded on the tracks of the recorder can be edited in a variety of ways, such as erasing portions of it or copying it to other tracks. This section explains the track editing functions.

HINT

•When using the track editing functions, the two tracks of each stereo track (7/8, 9/10) are handled as separate tracks.

•V-takes not currently selected for tracks 1 – 10 can also be selected for editing.

NOTE

In general, recorded track data that was rewritten by an editing operation cannot be recovered. If you plan to compare the state of the data before and after editing, you must Capture the state of that track (→ p.44).

Copying a specified region of data to another location

A specified region of recorded data can be copied to any location in any track. The data that was previously at the copy-destination will be erased, and overwritten by the copy-source data.

Copy-source data

Copy

Copy-destination track

1.In the main screen, press the [PROJECT/UTILITY] key.

The display will indicate "PROJECT."

2.Use the cursor [E]/[R] keys to make the display read "UTILITY TR EDIT," and press the [ENTER] key.

The track edit menu will appear, from which you can select

the desired type of editing function.

3.Make sure that the display indicates "TR EDIT COPY," and press the [ENTER] key.

A screen will appear in which you can specify the copy-

source track and V-take.

38

ZOOM MRS-1044