Track editing

[Recorder] Reference

10.Specify the move-destination track and V-take in the same way as in step 4.

A screen will appear in which you can specify the move-

destination location.

11.Specify the move-destination location in the same way as in step 6, and press the [ENTER] key.

A screen will appear in which you can specify the number of times (1 – 100) that the move-source region will be copied.

12.Turn the dial to specify the number of times that the data will be copied, and press the [ENTER] key.

The display will ask "TrMove SURE?," asking you to

confirm the Move operation.

13.To execute the Move operation, press the [ENTER] key. To cancel, press the [EXIT] key.

When you press the [ENTER] key and the Move operation is completed, the display will indicate "COMPLETE." If you then press the [EXIT] key, you will return to the Track Edit menu of step 2.

If you press the [EXIT] key in step 13, you will return to the setting screen of step 11. If necessary, you can press the [EXIT] key repeatedly to step back through each setting screen.

read "TR EDIT ERASE," and press the [ENTER] key.

A screen will appear in which you can specify the track

and V-take from which data will be erased.

4.Use the dial and the cursor [Q]/[W] keys to specify the track and V-take from which data will be erased.

In "TR xx-yy," "xx" is the track number and "yy" is the V- take number from which data will be erased. Use the dial to select the track number (1 – 10), and use the cursor [Q]/[W] keys to select the V-take number (1 – 10).

If you turn the dial toward the right when track 10 is selected, the following screen will appear.

In this screen you can use the dial to specify two adjacent odd-numbered/even-numbered tracks (1/2, 3/4, 5/6, 7/8, 9/10). In this case, data will be erased from the V-takes currently selected for the two selected tracks.

5.Press the [ENTER] key.

A screen will appear in which you can specify the starting location of the region that will be erased.

Erasing a specified region

This operation erases the recorded data from the specified region, returning it to a silent (blank) state.

Erase

1.In the main screen, press the [PROJECT/UTILITY] key.

The display will indicate "PROJECT."

2.Use the cursor [E]/[R] keys to make the display read "UTILITY TR EDIT," and press the [ENTER] key.

The Track Edit menu will appear.

3.Use the cursor [E]/[R] keys to make the display

6.Use the cursor [E]/[R] keys to move the blinking area in the display, and turn the dial to specify the location.

The location can be specified in one of the following two ways.

•Specifying the location numerically

Move the blinking area to one of the M (minutes) / S (seconds) / MS (millisecond) areas in the bottom of the display, and turn the dial to edit the value of each unit.

•Assigning a previously-specified mark location

Move the blinking area to the MARKER area in the upper right of the display, and turn the dial to specify the mark number.

42

ZOOM MRS-1044