HINT

Track editing

which you can switch the V-take of each track.

•By pressing the [TIME BASE] key to switch to the Measure display, you can specify the location in measure/beat/clock units.

•By holding down STOP[P] and pressing the PLAY[R] key, you can scrub-play the track and V-take you specified in step 4. For details on using scrub-playback, refer to p.31.

7.When you have finished specifying the starting location, press the [ENTER] key.

A screen will appear in which you can specify the ending

location of the region to be erased.

8.Specify the ending location of the region to be erased in the same way as in step 6.

At this time, you can press the PLAY[R] key to play back the region between the specified starting location and ending location. If there is no recorded data at the specified ending location, an "*" symbol will appear in the lower line of the screen.

9.When you have finished specifying the ending location, press the [ENTER] key.

The display will ask "TrErase SURE?," asking you to

confirm the Erase operation.

10.To execute the Erase operation press the [ENTER] key. To cancel, press the [EXIT] key.

When you press the [ENTER] key and the Erase operation has been completed, the display will indicate "COMPLETE." If you then press the [EXIT] key, you will return to the Track Edit menu from step 2.

If you press the [EXIT] key in step 9, you will return to the setting screen from step 7. If necessary, you can press the [EXIT] key repeatedly to step back through each setting screen.

Erasing the data of an entire track

You can erase all recorded data from a specified track. The

erased track will revert to an unrecorded state.

Erase

1.In the main screen, press the [V-TAKE] key.

The [V-TAKE] key will light, and a screen will appear in

2.Press the [PROJECT/UTILITY] key.

A menu will appear in which you can edit recorded data in

units of entire tracks.

3.Repeatedly press the [PROJECT/UTILITY] key to make the display indicate "ERASE TRxx-yy."

In "ERASE TRxx-yy," the xx and yy values respectively

indicate the track number and V-take number that will be

erased.

HINT

In this screen, the lit/unlit state of the dots in the level meter will indicate whether the currently specified V-take has already been recorded. For details refer to p.40.

4.Use the cursor [E]/[R] keys and the dial to specify the track/V-take that will be erased, and press the [ENTER] key.

The display will indicate "ERASE SURE?," asking you to

confirm the Erase operation.

5.Press the [ENTER] key to execute the Erase operation, or press the [EXIT] key to cancel.

When you press the [ENTER] key and the Erase operation has been completed, you will return to the screen from step 1. If you press the [EXIT] key, you will return to the screen from step 3. If necessary, you can press the [EXIT] key to step back through each screen.

Exchanging the data of entire tracks

You can exchange the recorded data of two specified

tracks/V-takes.

Exchange

1.In the main screen, press the [V-TAKE] key.

The [V-TAKE] key will light, and a screen will appear in

which you can switch the V-take of each track.

2.Press the [PROJECT/UTILITY] key.

[Recorder] Reference

ZOOM MRS-1044

43