Zoom MRS-1044 Use the cursor, [Effects] Reference, Press the [EDIT] key, 3.Press the [EDIT] key, Editing a send/return effect patch, 6.Turn the dial to change the setting

Using the send/return effects

HINT

•When a reverb or chorus/delay patch is selected, you can press the corresponding key ([REVERB] or [CHORUS/DELAY]) to switch that effect on/off. (When off, the key will be dark.)

•For details on track mixer operations, refer to p.49.

3.To return to the main screen, press the [EXIT] key.Editing a send/return effect patch

Here's how to edit a reverb or chorus/delay patch.

4.If you want to change the effect type, turn the dial.

In this example, the chorus/delay effect type has been changed from "CHORUS" to "DELAY." When the effect type is changed, the effect parameters will also be different.

HINT

When the contents of a patch are modified, the "EDIT" indicator in the upper part of the display will change to "EDITED."

1.Press the [EFFECT] key, and then press the [REVERB] key or [CHORUS/DELAY] key.

Press the [REVERB] key to edit a reverb patch, or press the [CHORUS/DELAY] key to edit a chorus/delay patch. When either key is pressed, the currently selected patch will be displayed. The following screen is an example of what you see when the [CHORUS/DELAY] key is pressed.

5.Use the cursor [Q]/[W] keys to select the effect parameter that you want to edit.

In this example, the TIME parameter of the "DELAY" effect type has been selected.

[Effects] Reference

Patch name Patch number

2.If necessary, turn the dial to select the patch that you want to edit.

3.Press the [EDIT] key.

The display will indicate "EDIT," and a screen will appear in which you can edit the patch. When the [EDIT] key is first pressed, a screen will appear in which you can select the effect type of the selected send/return effect (in this example, chorus/delay).

Effect type

Effect parameter Setting

6.Turn the dial to change the setting.

For details on the effect types that can be selected for reverb or chorus/delay, and on the range of each effect parameter, refer to the appendix (→ p.105) at the end of this manual.

7.As necessary, repeat steps 5 – 6 to edit other effect parameters.8.When you have finished editing, press the [EXIT] key.

You will return to the patch select screen.

NOTE

Be aware that if you return to the patch select screen and select another patch, your edits will be lost. If you want to keep the edited patch, refer to the following section.

82

ZOOM MRS-1044