Zoom MRS-1044 effect, 1.Press the [EFFECT] key, Selecting the patch for the insert, ■When inserted into the input mixer, 3.Turn the dial to select the desired patch

Using the insert effect

5.Turn the dial to change the setting to "DRY."

6.When you have finished adjusting settings, press the [EXIT] key several times.

You will return to the main screen.

NOTE

The "UTILITY REC SRC" setting is stored independently for each project. Before you begin recording other parts, change the setting back to "WET."

3.Turn the dial to select the desired patch.

As you turn the dial, new patches will be recalled

immediately.

4.If you want to temporarily turn the insert effect off, press the effect section [BYPASS/TUNER] key.

The [BYPASS/TUNER] key will light, and the insert effect will be bypassed. Bypass will be disabled when you press the [BYPASS/TUNER] key once again.

HINT

Selecting the patch for the insert	If you press the [ENTER] key after pressing the
effect	[BYPASS/TUNER] key, the Tuner function will be turned on.
	(For details on the Tuner function, refer to p.92.)

Here's how to select the patch for the insert effect.

1.Press the [EFFECT] key.

The [EFFECT] key will light, and a screen will appear in which you can select a patch for the effect that you operated last (either the insert effect or send/return effect). The display will indicate the currently selected patch.

INSERT: insert effect

S/R-REV: Send/return effect (reverb)

S/R-CHO: Send/return effect (chorus/delay)

Patch name Patch number

2.In the effect section, press the desired ALGORITHM key.

•GUITAR/BASS algorithm: [GUITAR/BASS] key

•MIC algorithm: [MIC] key

•LINE algorithm: [LINE] key

•MASTERING algorithm: [MASTERING] key

When selecting a patch for the insert effect, you will begin by first selecting the algorithm (the combination of effect modules). When you press the ALGORITHM key, the display will show the insert effect patches of that algorithm.

5.To return to the main screen, press the [EXIT] key.

The flow of the signal that passes through the insert effect will change as shown below, depending on the insert location, the number of input signal channels (1 or 2 channels), and the input/output type of the insert effect (mono input / stereo output, or stereo input and output). ("M → S" indicates mono input / stereo output, and "S → S" indicates stereo input/output algorithms.)

■When inserted into the input mixer

•When recording on two mono tracks (tracks 1/2, 3/4, 5/6) or on a stereo track (7/8, 9/10)

		Recorder
INPUT 1	EFFECT	Track
or
	( M → S )	Track
INPUT 2

		Recorder
INPUT 1	EFFECT	Track
or
	( S → S )	Track
INPUT 2

INPUT 1	Recorder
	Track
EFFECT
( M → S )	Track
INPUT 2

INPUT 1	Recorder
	Track
EFFECT
( S → S )	Track
INPUT 2

[Effects] Reference

ZOOM MRS-1044

77