Zoom MRS-1044 fader, [Effects] Reference, Editing the insert effect patch, ■When inserted into the track mixer, ■When inserted immediately before the MASTER

Using the insert effect

•When recording on one mono track (track 1 – 6)

INPUT 1		Recorder
	EFFECT	Track
or
	( M → S )
INPUT 2

		Recorder
INPUT 1	EFFECT	Track
or	( S → S )
INPUT 2
INPUT 1		Recorder
	EFFECT	Track
	( M → S )
INPUT 2
INPUT 1		Recorder
	EFFECT	Track
	( S → S )
INPUT 2

HINT

If no recording track is selected, the output signal of the insert effect will be sent to a location immediately before the MASTER fader, and mixed with the signals of the track mixer.

■When inserted into the track mixer

•If two mono channels (channels 1/2, 3/4, 5/6), a stereo channel (7/8, 9/10), or the DRUM channel is selected as the insert location

Recorder		Track mixer
Track	EFFECT	Channel
	( M → S )
Track		Channel

Recorder		Track mixer
Track	EFFECT	Channel
	( S → S )
Track		Channel

•If a mono channel (channel 1 – 6) or the BASS channel is selected as the insert location

Recorder		Track mixer
Track	EFFECT	Channel
	( M → S )
Recorder		Track mixer
Track	EFFECT	Channel
	( S → S )

■When inserted immediately before the MASTER

[Effects] Reference

fader

		MASTER fade
		OUTPUT
L	EFFECT	L
R	( M → S )	R
L	EFFECT	L
R	( S → S )	R

Editing the insert effect patch

The effect modules of the insert effect have various "effect parameters" that can be adjusted to make detailed changes to the character of the effect. By editing the effect parameters, you can obtain the desired tone or effect.

For some effect modules, you can change the "effect type." For example in the GUITAR/BASS algorithm, the MODULATION/DELAY effect module provides twelve effect types such as chorus, flanger, and phaser, and you can select and use any one of these. When you change the effect type, the effect parameters will also change.

78

ZOOM MRS-1044