Zoom MRS-1044 Use the MARKER, Press the [EXIT] key, 5.Press the [EXIT] key, 10.Press the [EXIT] key, 9.Turn the dial to select the number of the scene you saved in step

Saving/recalling mixer settings (Scene function)

HINT

•If you press the [MARK] key at a location where a mark has not yet been assigned, a new mark will be assigned to that location.

•If a dot is shown at the lower right of the mark number, this means that the mark matches the current location.

4.Turn the dial to select the number of the scene you saved in step 1 (the scene that will be the starting point of the mix).

The scene will be assigned to the mark, and at the same time the selected scene will be recalled. The following screen shows an example of when mark number 0 is assigned to scene number 1.

11.Using the procedure from steps 6 – 10, assign a mark to each point at which you want the mix to change, and assign a scene to each of these marks.

12.When you have assigned the desired scenes to the marks, press the ZERO [U] key to locate to the beginning of the song, and press the PLAY [R] key to play back.

Each time the song reaches the location of a mark to which

a scene has been assigned, that scene will be recalled.

HINT

To cancel a scene assignment, turn the dial to make the display indicate "--".

5.Press the [EXIT] key.

You will return to the main screen.

6.Locate the point at which you want the mix to change, and assign a mark.

7.While playing back the song from that point, create the new mix, and save it in a scene.

8.Use the MARKER [U]/[I] keys to locate to the mark you assigned in step 6, and press the [MARK] key.

A screen will appear, allowing you to assign a scene to the

mark you selected in step 6.

9.Turn the dial to select the number of the scene you saved in step 7.10.Press the [EXIT] key.

You will return to the main screen.

[Mixer] Reference

ZOOM MRS-1044

53