Step 2: Record the first track

recording level after selecting the insert effect patch.

INSERT

EFFECT

2With the recorder stopped, repeatedly press status key 1 to make the key light red.

Status keys 1 – 6, 7/8, and 9/10 are used to switch channel- muting on/off and to select the recording track. Each time you press a status key, the key will cycle through the following states: lit green (channel= mute off) → dark (channel= mute on) → lit red (selected as the recording track).

When track 1 is selected as the recording track (the status key 1 will change from green to red), the input signal routing will change as follows.

Operating fader 1 simply changes the level at which the recording source is being monitored, and will not affect the recording level. If necessary, you can operate the DRUM/BASS faders to adjust the volume balance with the rhythm song. When you are finished adjusting the monitor level, press the STOP [P] key to stop the rhythm song.

4Press the ZERO [U] key to return to the beginning of the song.5To begin recording, hold down the REC [O] key and press the PLAY [R] key.

tour Introductory

When a recording track has not been selected

Track 1

Track 2

Track 3

MASTER

The REC [O] key and PLAY [R] key will light, and recording on track 1 will begin. Record your guitar playing while listening to the rhythm song.

When a recording track (track 1) has been selected

1 MASTER

Track 1

Track 2

Track 3

HINT

6When you have finished recording the guitar, press the STOP [P] key.

The REC [O] key and PLAY [R] key will go dark, and

recording will stop.

7To listen to the recorded content, press the ZERO [U] key to return to the beginning of the song, and

press the PLAY [R] key.

Track 1 will be played back together with the rhythm song.

The number of tracks that can be recorded simultaneously is limited to either two mono tracks or one stereo track. If you want to record in stereo on tracks 1 – 6, select the recording tracks by simultaneously pressing status keys in a combination of 1/2, 3/4, or 5/6.

3Press the PLAY [R] key, and while listening to the rhythm song, operate fader 1 to adjust the monitor

level of the guitar.

1

If you want to re-do the recording, repeat steps 2 – 6.

8If you are satisfied with the recorded content, save the current project.

For details on saving the project, refer to p.19.

HINT

•When the recorder is stopped, you can use the REW [T] / FF [Y] keys to move the current location backward or forward in steps of one second (if the counter is displaying the time) or in steps of one beat (if the counter is displaying the measure). After moving in this way, you can press the PLAY [R] key to begin playback from that location.

•You can also use the REW [T] / FF [Y] keys to move the current location, and then re-record from that location. If

22

ZOOM MRS-1044