Zoom MRS-1044 tour Introductory, to modify the setting, 1Press the [EFFECT] key, 4-2:Using the send/return effects, Change the send/return effect patch

Step 4: Mixdown

tour Introductory

screen that will appear if you press the [EQ HIGH] key.

9Press the status key of the channel whose EQ you want to adjust.

10Use the cursor [W]/[Q] keys to select the EQ parameter that you want to adjust, and turn the dial

to modify the setting.

The available parameters and their ranges are as follows.

●If you press the [EQ HIGH] key first

•EQ HI G: Adjust the amount of boost/cut -12 – 0 – 12 (dB) for the high-frequency range.

•EQ HI F: Adjust the frequency at which the high- frequency boost or cut will occur, in the range of 500 – 18000 (Hz).

●If you press the [EQ LOW] key first

•EQ LO G: Adjust the amount of boost/cut -12 – 0 – 12 (dB) for the low-frequency range.

•EQ LO F: Adjust the frequency at which the low- frequency boost or cut will occur, in the range of 40 – 1600 (Hz).

HINT

•When the EQ HI G / EQ HI F parameters are displayed in the screen, you can press the [EQ HIGH] key to switch the high-frequency EQ on/off. (The key will be dark when this is turned off.)

•When the EQ LO G / EQ LO F parameters are displayed in the screen, you can press the [EQ LOW] key to switch the low-frequency EQ on/off. (The key will be dark when this is turned off.)

the signal flow of the send/return effects.

CHORUS/		Send
		CHORUS/
DELAY
SEND LEVEL		DELAY
REVERB		REVERB
SEND LEVEL
DRUM BASS 1 2	7/8 9/10 MASTER	Return

The amount of signal sent to each effect (send level) adjusts the depth of each send/return effect for each channel. Raising the send level will increase the amount of signal that is sent to the effect, producing a deeper effect for that channel.

In this example, we will select a send/return effect patch, and adjust the send level of each channel to adjust the amount of reverb and chorus.

Change the send/return effect patch

Newly created projects contain patches for reverb and chorus/delay. Here's how you can change the patch that is currently selected for reverb or chorus/delay, and edit the reverb or chorus effect as desired.

1Press the [EFFECT] key.

A screen will appear in which you can select the patches for the internal effects (insert effect or send/return effects).

11Repeat steps 9 – 10 to create settings in the same way for other EQ parameters or other channels.

12When you have finished creating settings, press the [EXIT] key.

You will return to the main screen.

4-2: Using the send/return effects

Two effects, reverb and chorus/delay, are internally connected to the send/return of the mixer. These effects are called "send/return effects." The following diagram shows

2Press the [REVERB] key or [CHORUS/DELAY] key.

Press the [REVERB] key to select a reverb patch, or the [CHORUS/DELAY] key to select a chorus/delay patch. The display will indicate the patch that is currently selected for the effect you selected.

The screen shown in the next page is an example of when the [REVERB] key is pressed.

26

ZOOM MRS-1044