Zoom MRS-1044 Saving/recalling mixer settings (Scene function), SAVE, Saving a scene, Press the [EXIT] key, 5.Press the [EXIT] key, 3.Press the cursor [W] key twice

Saving/recalling mixer settings (Scene function)

2.Press the status key (1 – 6) for one of the two channels that you want to stereo-link.

3.Press the cursor [W] key twice.

The ST LINK (stereo link) parameter screen will appear.

4.Turn the dial to switch the setting on.

Stereo linking will be enabled for the selected channel and the adjacent odd-numbered/even-numbered channel. To defeat stereo link, turn this parameter off (oFF).

5.Press the [EXIT] key.

You will return to the main screen.

HINT

The PAN parameter of two stereo-linked channels will function as a BALANCE parameter that adjusts the volume balance between the odd-numbered / even-numbered channels.

NOTE

•To adjust the volume of stereo-linked channels, use the odd-numbered fader. (The even-numbered fader will have no effect.)

•The parameters as well as the status keys of 2 stereo- linked channels will operate in tandem.

Saving/recalling mixer settings (Scene function)

The current mixer and effect settings can be saved as a "scene" in a special area of memory, and recalled either manually or automatically when desired. This is convenient when you want to compare various mixes, or when you want to automate mix operations.

A scene contains the following data.

•Input mixer (except for the REC LEVEL parameter) and track mixer settings

•MASTER fader setting

•The state of all status keys

•The patch number currently used by the insert effect and the send/return effects

Up to 100 different scenes can be stored in memory. Scene data stored in memory is saved on the internal hard disk as part of the currently selected project.

Saving a scene

Here's how to save the current settings as a scene.

1.Press the [SCENE] key, and use the cursor [E]/[R] keys to make the display read "SCENE

SAVE."

The right side of the display will indicate the scene number

(0 – 99) in which the data will be saved.

NOTE

When you save a scene for the first time, pressing the [SCENE] key will automatically access the "SCENE SAVE" screen.

2.Turn the dial to select the number (0 – 99) in which the scene will be saved.

Numbers in which a scene is already saved are indicated by an asterisk "*" at the left.

3.To save the scene, press the [ENTER] key.

The scene will be saved in the selected number. To return to the main screen, press the [ENTER] key.

[Mixer] Reference

ZOOM MRS-1044