Rear panel

which a mic or line-level device can be connected.

•GUITAR/BASS: This is a phone jack to which a passive- type electric guitar or bass can be connected directly.

NOTE

These jacks are given priority in the order of GUITAR/BASS

→UNBALANCE → BALANCE. For example, if all three are connected, the GUITAR/BASS jack will be selected.

(4)[EXP PEDAL] jack

A separately sold expression pedal (ZOOM FP01, FP02) can be connected to this jack.

(5)[FOOT SW] jack

A separately sold foot switch (ZOOM FS01) can be connected to this jack.

(2)[INPUT 2] jacks

These are the input jacks for INPUT 2. When connecting a stereo output device, use these jacks in conjunction with the [INPUT 1] jacks. Select and use one of the following two jacks.

•BALANCE: This is an XLR balanced jack to which a mic or line-level device can be connected.

•UNBALANCE: This is an unbalanced phone jack to which a mic or line-level device can be connected.

NOTE

If both jacks are connected, the UNBALANCE jack will be selected.

(3)[OUTPUT] jacks

These jacks output the signal that has passed through the MASTER fader. The following three jacks can be used simultaneously.

•MASTER: These are RCA phono analog output jacks.

•PHONES: A pair of stereo headphones can be connected to this jack. Use the knob beside this jack to adjust the headphone volume.

•DIGITAL: This is an optical-type digital output jack.

(6)[MIDI IN] connector

MIDI messages can be input from this connector.

(7)[MIDI OUT] connector

MIDI messages can be output from this connector.

(8)[PHANTOM ON/OFF] switch

When this switch is on, +48V phantom power will be supplied to the two [INPUT 1/2] BALANCE jacks.

NOTE

If devices that do not require phantom power are connected to the [INPUT 1/2] BALANCE jacks, you must turn this switch off.

(9)[POWER] switch

This switch turns the power of the MRS-1044 on/off.

NOTE

When turning off the power of the MRS-1044, you must use the [POWER] switch. If you turn the power off by simply disconnecting the AC adaptor plug, the previously recorded content or changes will be lost.

(10)[DC 12V] jack

Connect the included AC adaptor to this jack.

do they what and 1044-MRS the of Parts

Side panel

This slot is for installation of a separately sold SCSI board or USB board (planned for release).

ZOOM MRS-1044

13