Track editing

move-destination will be erased, and overwritten by the move-source data. When this operation is completed, the move-source region will contain silence.

Move-source track

Move

Move-destination track

1.In the main screen, press the [PROJECT/UTILITY] key.

The display will indicate "PROJECT."

2.Use the cursor [E]/[R] keys to make the display read "UTILITY TR EDIT," and press the [ENTER] key.

The track edit menu will appear.

6.Use the cursor [E]/[R] keys to move the blinking area in the display, and turn the dial to specify the location.

The location can be specified in one of the following two ways.

•Specifying the location numerically

Move the blinking area to one of the M (minutes) / S (seconds) / MS (millisecond) areas in the bottom of the display, and turn the dial to edit the value of each unit.

•Assigning a previously-specified mark location

Move the blinking area to the MARKER area in the upper right

of the display, and turn the dial to specify the mark number.

HINT

3.Use the cursor [E]/[R] keys to make the display read "TR EDIT MOVE," and press the [ENTER] key.

A screen will appear in which you can specify the move-

destination track and V-take.

4.Use the dial and the cursor [Q]/[W] keys to specify the move-source track and V-take.

In "TR xx-yy," "xx" specifies the move-source track number, and "yy" specifies the V-take number. Use the dial to select the track number (1 – 10), and use cursor [Q]/[W] keys to select the V-take number (1 – 10).

If you turn the dial toward the right when track 10 is selected, the following screen will appear.

In this screen you can use the dial to specify two adjacent odd-numbered/even-numbered tracks (1/2, 3/4, 5/6, 7/8, 9/10) as the move-source. In this case, the V-takes currently selected for the two selected tracks will automatically be selected as the move-source.

5.Press the [ENTER] key.

A screen will appear in which you can specify the starting location of the move-source.

•By pressing the [TIME BASE] key to switch to the Measure display, you can specify the location in measure/beat/clock units.

•By holding down STOP[P] and pressing the PLAY[R] key, you can scrub-play the track and V-take you specified in step 4. For details on using scrub-playback, refer to p.31.

7.When you have finished specifying the starting location, press the [ENTER] key.

A screen will appear in which you can specify the ending

location of the move-source.

8.Specify the ending location of the move-source in the same way as in step 6.

At this time, you can press the PLAY[R] key to play back the region between the specified starting location and ending location. If there is no recorded data at the specified ending location, an "*" symbol will appear in the lower line of the screen.

9.When you have finished specifying the ending location, press the [ENTER] key.

A screen will appear in which you can specify the move-

destination track (and V-take).

[Recorder] Reference

ZOOM MRS-1044

41