Using the send/return effects

 

 

HINT

Using the send/return effects

•Patches that you store are saved on the hard disk as part of the project.

•Patch data included in an already existing project can be loaded into the current project (→ p.84). This is

convenient when you want to use an edited patch in a different project.

Editing the name of an insert effect patch

Here's how to edit the name of the currently selected patch.

1.Press the [EFFECT] key, and then press the [EDIT] key.

The currently selected patch can now be edited.

2.Press the [TOTAL] key, and use the cursor [Q]/[W] keys to make the display read "PAT NAM."

The name of the patch will be displayed below "PAT

NAM," and the character currently selected for editing will

blink.

3.Use the cursor [E]/[R] keys to move the blinking area, and turn the dial to change the character.

For details on the characters that can be selected, refer to

p.36.

4.When you have finished editing the name, use the cursor [Q]/[W] keys to make the display read "STORE," and press the [ENTER] key three times.

The patch will be stored with the edited name, and you will

return to the patch select screen.

This section explains how to select and edit patches for the

send/return effects (reverb, chorus/delay)

About the send/return effect patches

The "reverb" and "chorus/delay" send/return effects are separate and independent.

Reverb and chorus/delay each have an "effect type" that determines the type of effect, and various parameters that let you adjust the character of the effect. Settings for the effect type and parameters, together with a name, are collectively called send/return effect "patches."

A newly created project contains 20 different reverb patches and 20 different chorus/delay patches. You can instantly switch reverb or chorus/delay settings simply by choosing the effect for which you want to select a patch (reverb or chorus/delay), and then selecting a patch.

Algorithm

Patch number

Types

 

 

 

REVERB

00 – 19

20 types

 

 

 

CHORUS/DELAY

00 – 19

20 types

Selecting a send/return effect patch

Here's how to select a reverb or chorus/delay patch.

1.Press the [EFFECT] key, and then press the [REVERB] key or [CHORUS/DELAY] key.

Press the [REVERB] key if you want to select a reverb patch, or the [CHORUS/DELAY] key if you want to select a chorus/delay patch. The currently selected patch will be displayed. The following display shows an example of what you see when the [REVERB] key is pressed.

2.Turn the dial to select the new patch.

As you turn the dial, new patches will be recalled immediately. If the track mixer REVERB SEND and CHORUS/DELAY SEND parameter settings are raised, you can press the PLAY [R] key to play back the song, and listen to the result of the newly selected patch.

[Effects] Reference

ZOOM MRS-1044

81