Zoom MRS-1044 Capturing the recorded contents of a track, Use the cursor, Use the cursor, Capturing a track, [Recorder] Reference

Track editing

A menu will appear in which you can edit recorded data in

units of entire tracks.

3.Repeatedly press the [PROJECT/UTILITY] key to make the display indicate "EXCHG TRxx-yy."

In "EXCGH TRxx-yy," the xx and yy values respectively indicate the track number and V-take number that will be exchanged with another track/V-take.

Capturing the recorded contents of a track

The MRS-1044 lets you capture the recorded data of a desired track, and temporarily store it on the hard disk. The captured data can be swapped (exchanged) with a current track when needed.

For example if you capture a track before performing punch-in/out recording on that track, you can repeat the Swap operation to compare its original state with the results of punch-in/out recording.

[Recorder] Reference

4.Use the cursor [E]/[R] keys and the dial to specify the track/V-take that you want to exchange, and press the [ENTER] key.

A screen will appear in which you can specify the other track/V-take with which the first will be exchanged. In "ExchgTo TRxx-yy," the xx and yy values respectively indicate the track number and V-take number.

HINT

In this screen, the lit/unlit state of the dots in the level meter will indicate whether the currently specified V-take has already been recorded. For details refer to p.40.

5.Use the cursor [E]/[R] keys and the dial to specify the other track/V-take for the exchange, and press the [ENTER] key.

The display will indicate "EXCHG SURE?", asking you to

confirm the Exchange operation.

6.Press the [ENTER] key to execute the Exchange operation, or press the [EXIT] key to cancel.

When you press the [ENTER] key and the Exchange operation has been completed, you will return to the screen from step 1.

If you press the [EXIT] key, you will return to the screen from step 4. If necessary, you can press the [EXIT] key to step back through each screen.

◆ Capture Recorded data

Recorder

Track 1

Track 2

Track 3

Capture track 1

Data captured from track 1

◆ Swap Re-recorded region

Recorder

Track 1

Track 2

Track 3

Capture track 1

Data captured from track 1

Recorder

Track 1

Track 2

Track 3

Capture track 1

Capturing a track

Here's how to select and capture a desired track.

1.In the main screen, press the [UNDO/REDO] key.

A screen will appear in which you can select the track to be

captured.

44

ZOOM MRS-1044