Using the insert effect

The following diagram shows an example of when the

MODULATION/DELAY module effect is changed from

"CHORUS" to "FLANGER."

Effect type

NOTE

Some effect modules have only one effect type. For such modules, there will be no screen for selecting the effect type.

HINT

If the contents of a patch have been edited, the "EDIT" indicator in the upper part of the display will change to "EDITED."

Patch level

HINT

Strictly speaking, the patch level is not an effect module, but is one of the parameters included in the patch.

10.When you have finished editing, press the [EXIT] key.

You will return to the patch select screen.

NOTE

Be aware that if you return to the patch select screen and select another patch, the edited contents will be lost. If you want to keep the results of your editing, refer to the following section.

[Effects] Reference

6.Use the cursor [Q]/[W] keys to select the effect parameter that you want to edit.

The following diagram shows an example of what you see when you have selected the DEPTH parameter of the "FLANGER" effect.

Effect parameter

Setting

7.Turn the dial to change the setting.

For details on the effect types that can be selected for each effect module, and on the effect parameters of each type, refer to the appendix (→ p.98) at the end of this manual.

8.Repeat steps 4 – 7 to make the desired edits for other modules.

9.If you want to adjust the patch level (the final volume of the patch), press the [TOTAL] key, use the cursor [Q]/[W] keys to make the display read "TOTAL PAT LVL," and turn the dial.

The patch level can be adjusted in a range of 1 – 30.

Storing an insert effect patch

A patch you edited can be stored in any location of the same algorithm. You can also store an existing patch in another location to create a copy of that patch.

1.Press the [EFFECT] key, and then press the [EDIT] key.

The currently selected patch can now be edited.

2.Press the [TOTAL] key, and use the cursor [Q]/[W] keys to make the display read "STORE."

3.Press the [ENTER] key.

A screen will appear in which you can specify the store-

destination patch number.

4.Turn the dial to select the store-destination patch number, and press the [ENTER] key.

The display will ask "SURE?"

5.Press the [ENTER] key.

The patch will be stored, and you will return to the patch

select screen.

80

ZOOM MRS-1044