Prestige 2602HW Series User’s Guide

Figure 53 QoS

The following table describes the labels in this screen.

Table 35 QoS

LABEL

DESCRIPTION

 

 

SIP TOS Priority

Type a priority for voice transmissions. The Prestige applies Type of Service

 

priority tags with this priority to voice traffic that it transmits. Priorities 6 and 7 are

 

reserved for network control traffic. It is recommended that you use priority 5 for

 

SIP.

RTP TOS Priority

Type a priority for voice transmissions. The Prestige applies Type of Service

 

priority tags with this priority to RTP traffic that it transmits. Priorities 6 and 7 are

 

reserved for network control traffic. It is recommended that you use priority 5 for

 

RTP.

Voice VLAN ID

Enable VLAN tagging if the Prestige needs to be a member of a VLAN group in

 

order to communicate with the SIP server. Your LAN and gateway must also be set

 

up to use VLAN tags. Some switches also give priority to voice traffic based on its

 

VLAN tag.

 

Type the VLAN ID (VID) from 0 to 4095 for the Prestige to add to voice Ethernet

 

frames that it sends out to the network.

 

Disable VLAN tagging if the Prestige does not need to be a member of a VLAN

 

group to communicate with the SIP server.

Back

Click Back to return to the previous screen.

 

 

Apply

Click Apply to save your changes back to the Prestige.

 

 

Cancel

Click Cancel to begin configuring this screen afresh.

 

 

10.6 Phone

You can configure the volume, echo cancellation and VAD settings for each individual phone port on the Prestige. You can also select which SIP account to use for making outgoing calls.

142

Chapter 10 Voice Screens