Prestige 2602HW Series User’s Guide
Figure 68 Firewall: Rule Summary
Table 48 Rule Summary
LABEL | DESCRIPTION |
|
|
Firewall Rules | This |
Storage Space | rules it is currently using. When you are using 80% or less of the storage space, the |
in Use | bar is green. When the amount of space used is over 80%, the bar is red. |
Packet Direction | Use the |
| want to configure firewall rules. |
Default Policy | This field displays the default action and log policy you selected in the Default Rule |
| screen for the packet direction shown in the field above. |
| The following |
| traffic traveling in the selected packet direction. The firewall rules that you configure |
| (summarized below) take priority over the general firewall action settings above. |
Rule | This is your firewall rule number. The ordering of your rules is important as rules are |
| applied in turn. |
| Click a rule’s number to go to the Firewall Edit Rule screen to configure or edit a |
| firewall rule. |
Active | This field displays whether a firewall is turned on (Y) or not (N). |
|
|
Source IP | This |
| which this firewall rule applies. Please note that a blank source or destination |
| address is equivalent to Any. |
Destination IP | This |
| to which this firewall rule applies. Please note that a blank source or destination |
| address is equivalent to Any. |
Service | This |
| Please note that a blank service type is equivalent to Any. See for more |
| information. |
Action | This is the specified action for that rule, either Block or Forward. Note that Block |
| means the firewall silently discards the packet. |
Chapter 14 Firewall Configuration | 175 |