Prestige 2602HW Series User’s Guide
Figure 250 Example of IP Policy Routing
To force packets coming from clients with IP addresses of 192.168.1.33 to 192.168.1.64 to be routed to the Internet via the WAN port of the Prestige, follow the steps as shown next.
1Create a routing policy set in menu 25.
2Create a rule for this set in Menu 25.1.1 — IP Routing Policy as shown next.
Figure 251 IP Routing Policy Example
Menu 25.1.1 - IP Routing Policy
Policy Set Name= set1 | Packet length= 10 | |
Active= Yes |
| Len Comp= N/A |
Criteria: | = 6 | end= 192.168.1.64 |
IP Protocol | ||
Type of Service= Don't Care | end= N/A | |
Precedence | = Don't Care | end= N/A |
Source: |
| end= 80 |
addr start= 192.168.1.2 | Log= No | |
port start= 0 |
|
|
Destination: |
|
|
addr start= 0.0.0.0 |
| |
port start= 80 |
|
|
Action= Matched |
|
|
Gateway addr = 192.168.1.1 |
| |
Type of Service= No Change |
| |
Precedence | = No Change |
|
Press ENTER to Confirm or ESC to Cancel:
1Check Menu 25.1 — IP Routing Policy Setup to see if the rule is added correctly.
2Create another policy set in menu 25.
Chapter 40 IP Policy Routing | 397 |