Prestige 2602HW Series User’s Guide

Figure 201 Menu 22 SNMP Configuration

Menu 22 - SNMP Configuration

SNMP:

Get Community= public

Set Community= public

Trusted Host= 0.0.0.0

Trap:

Community= public

Destination= 0.0.0.0

Press ENTER to Confirm or ESC to Cancel:

The following table describes the SNMP configuration parameters.

Table 114 Menu 22 SNMP Configuration

FIELD

DESCRIPTION

 

 

SNMP:

 

 

 

Get Community

Type the Get Community, which is the password for the incoming Get- and

 

GetNext requests from the management station.

Set Community

Type the Set community, which is the password for incoming Set requests from

 

the management station.

Trusted Host

If you enter a trusted host, your Prestige will only respond to SNMP messages

 

from this address. A blank (default) field means your Prestige will respond to all

 

SNMP messages it receives, regardless of source.

Trap:

 

 

 

Community

Type the trap community, which is the password sent with each trap to the

 

SNMP manager.

Destination

Type the IP address of the station to send your SNMP traps to.

 

 

When you have completed this menu, press [ENTER] at the prompt “Press ENTER to Confirm or ESC to Cancel:” to save your configuration, or press [ESC] at any time to cancel.

34.4 SNMP Traps

The Prestige will send traps to the SNMP manager when any one of the following events occurs:

Table 115

SNMP Traps

 

 

 

 

 

TRAP #

 

TRAP NAME

DESCRIPTION

 

 

 

 

1

 

coldStart (defined in RFC-1215)

A trap is sent after booting (power on).

 

 

 

 

2

 

warmStart (defined in RFC-1215)

A trap is sent after booting (software reboot).

 

 

 

 

3

 

linkDown (defined in RFC-1215)

A trap is sent with the port number when any of the

 

 

 

links are down. See the following table.

4

 

linkUp (defined in RFC-1215)

A trap is sent with the port number.

 

 

 

 

Chapter 34 SNMP Configuration

347