Prestige 2602HW Series User’s Guide

The following table is a summary. Please note that the internal filename refers to the filename on the Prestige and the external filename refers to the filename not on the Prestige, that is, on your computer, local network or FTP site and so the name (but not the extension) may vary.

After uploading new firmware, see the ZyNOS F/W Version field in Menu 24.2.1 – System Maintenance – Information to confirm that you have uploaded the correct firmware version. The AT command is the command you enter after you press “y” when prompted in the SMT menu to go into debug mode.

Table 124 Filename Conventions

FILE TYPE

INTERNAL NAME

EXTERNAL NAME

DESCRIPTION

 

 

 

 

Configuration

Rom-0

This is the configuration filename on the

*.rom

File

 

Prestige. Uploading the rom-0 file replaces the

 

 

 

entire ROM file system, including your Prestige

 

 

 

configurations, system-related data (including

 

 

 

the default password), the error log and the

 

 

 

trace log.

 

Firmware

Ras

This is the generic name for the ZyNOS

*.bin

 

 

firmware on the Prestige.

 

37.2 Backup Configuration

Option 5 from Menu 24 – System Maintenance allows you to backup the current Prestige configuration to your computer. Backup is highly recommended once your Prestige is functioning properly. FTP is the preferred methods for backing up your current configuration to your computer since they are faster. Any serial communications program should work fine; however, you must use Xmodem protocol to perform the download/upload and you don’t have to rename the files.

Please note that terms “download” and “upload” are relative to the computer. Download means to transfer from the Prestige to the computer, while upload means from your computer to the Prestige.

37.2.1 Backup Configuration

Follow the instructions as shown in the next screen.

366

Chapter 37 Firmware and Configuration File Maintenance