Prestige 2602HW Series User’s Guide

Figure 142 Menu 3.2.1 IP Alias Setup

Menu 3.2.1 - IP Alias Setup

IP Alias 1= No

IP Address= N/A

IP Subnet Mask= N/A

RIP Direction= N/A

Version= N/A

Incoming protocol filters= N/A

Outgoing protocol filters= N/A

IP Alias 2= No

IP Address= N/A

IP Subnet Mask= N/A

RIP Direction= N/A

Version= N/A

Incoming protocol filters= N/A

Outgoing protocol filters= N/A

Enter here to CONFIRM or ESC to CANCEL:

Follow the instructions in the following table to configure IP Alias parameters.

Table 97 Menu 3.2.1 IP Alias Setup

FIELD

DESCRIPTION

 

 

IP Alias

Choose Yes to configure the LAN network for the Prestige.

 

 

IP Address

Enter the IP address of your Prestige in dotted decimal notation

 

 

IP Subnet Mask

Your Prestige will automatically calculate the subnet mask based on the IP address

 

that you assign. Unless you are implementing subnetting, use the subnet mask

 

computed by the Prestige

RIP Direction

Press [SPACE BAR] to select the RIP direction. Choices are None, Both, In Only

 

or Out Only.

Version

Press [SPACE BAR] to select the RIP version. Choices are RIP-1, RIP-2Bor RIP-

 

2M.

Incoming

Enter the filter set(s) you wish to apply to the incoming traffic between this node and

Protocol Filters

the Prestige.

Outgoing

Enter the filter set(s) you wish to apply to the outgoing traffic between this node and

Protocol Filters

the Prestige.

When you have completed this menu, press [ENTER] at the prompt “Press ENTER to Confirm or ESC to Cancel:” to save your configuration, or press [ESC] at any time to cancel.

27.5 Route IP Setup

The first step is to enable the IP routing in Menu 1 — General Setup.

To edit menu 1, type 1 in the main menu and press [ENTER]. Set the Route IP field to Yes by pressing [SPACE BAR].

Chapter 27 Internet Access

291