Prestige 2602HW Series User’s Guide

Table 182 ICMP Logs (continued)

LOG MESSAGE

DESCRIPTION

 

 

Triangle route packet forwarded:

The firewall allowed a triangle route session to pass

ICMP

through.

Packet without a NAT table entry

The router blocked a packet that didn’t have a

blocked: ICMP

corresponding NAT table entry.

Unsupported/out-of-order ICMP:

The firewall does not support this kind of ICMP packets or

ICMP

the ICMP packets are out of order.

Router reply ICMP packet: ICMP

The router sent an ICMP reply packet to the sender.

Table 183 CDR Logs

LOG MESSAGE

DESCRIPTION

 

 

board %d line %d channel %d,

The router received the setup requirements for a call. “call” is

call %d, %s C01 Outgoing Call

the reference (count) number of the call. “dev” is the device

dev=%x ch=%x %s

type (3 is for dial-up, 6 is for PPPoE, 10 is for PPTP).

 

"channel" or “ch” is the call channel ID.For example,"board 0

 

line 0 channel 0, call 3, C01 Outgoing Call dev=6 ch=0

 

"Means the router has dialed to the PPPoE server 3 times.

board %d line %d channel %d,

The PPPoE, PPTP or dial-up call is connected.

call %d, %s C02 OutCall

 

Connected %d %s

 

board %d line %d channel %d,

The PPPoE, PPTP or dial-up call was disconnected.

call %d, %s C02 Call

 

Terminated

 

Table 184 PPP Logs

LOG MESSAGE

DESCRIPTION

 

 

ppp:LCP Starting

The PPP connection’s Link Control Protocol stage has started.

ppp:LCP Opening

The PPP connection’s Link Control Protocol stage is opening.

ppp:CHAP Opening

The PPP connection’s Challenge Handshake Authentication Protocol stage is

 

opening.

ppp:IPCP Starting

The PPP connection’s Internet Protocol Control Protocol stage is starting.

ppp:IPCP Opening

The PPP connection’s Internet Protocol Control Protocol stage is opening.

ppp:LCP Closing

The PPP connection’s Link Control Protocol stage is closing.

ppp:IPCP Closing

The PPP connection’s Internet Protocol Control Protocol stage is closing.

498