Prestige 2602HW Series User’s Guide

Figure 151 Menu 11.6 for VC-based Multiplexing

Menu 11.6 - Remote Node ATM Layer Options

VPI/VCI (VC-Multiplexing)

VC Options for IP:

VC Options for Bridge:

VPI #=

8

VPI #= 1

VCI #=

35

VCI #= 36

ATM QoS Type= UBR

ATM QoS Type= N/A

Peak Cell Rate (PCR)= 0

Peak Cell Rate (PCR)= N/A

Sustain Cell Rate (SCR)= 0

Sustain Cell Rate (SCR)= N/A

Maximum Burst Size (MBS)= 0

Maximum Burst Size (MBR)= N/A

Enter here to CONFIRM or ESC to CANCEL:

28.5.2 LLC-based Multiplexing or PPP Encapsulation

For LLC-basedmultiplexing or PPP encapsulation, one VC carries multiple protocols with protocol identifying information being contained in each packet header.

Figure 152 Menu 11.6 for LLC-based Multiplexing or PPP Encapsulation

Menu 11.6 - Remote Node ATM Layer Options

VPI/VCI (LLC-Multiplexing or PPP-Encapsulation)

VPI #= 8

VCI #= 35

ATM QoS Type= UBR

Peak Cell Rate (PCR)= 0

Sustain Cell Rate (SCR)= 0

Maximum Burst Size (MBS)= 0

ENTER here to CONFIRM or ESC to CANCEL:

In this case, only one set of VPI and VCI numbers need be specified for all protocols. The valid range for the VPI is 0 to 255 and for the VCI is 32 to 65535 (1 to 31 is reserved for local management of ATM traffic).

28.5.3 Advance Setup Options

In menu 11.1, select PPPoE in the Encapsulation field.

Chapter 28 Remote Node Configuration

303