Prestige 2602HW Series User’s Guide

Table 49 Firewall: Edit Rule

LABEL

DESCRIPTION

 

 

Active

Select this option to enable this firewall rule.

 

 

Action for Matched

Use the radio button to select whether to discard (Block) or allow the passage of

Packet

(Forward) packets that match this rule.

Source/Destination

 

Address

 

Address Type

Do you want your rule to apply to packets with a particular (single) IP, a range of

 

IP addresses (e.g., 192.168.1.10 to 192.169.1.50), a subnet or any IP address?

 

Select an option from the drop-down list box that includes: Single Address,

 

Range Address, Subnet Address and Any Address.

Start IP Address

Enter the single IP address or the starting IP address in a range here.

 

 

End IP Address

Enter the ending IP address in a range here.

 

 

Subnet Mask

Enter the subnet mask here, if applicable.

 

 

Add

Click Add to add a new address to the Source or Destination Address box.

 

You can add multiple addresses, ranges of addresses, and/or subnets.

Edit

To edit an existing source or destination address, select it from the box and click

 

Edit.

Delete

Highlight an existing source or destination address from the Source or

 

Destination Address box above and click Delete to remove it.

Services

 

 

 

Available/ Selected

Please see for more information on services available. Highlight a service from

Services

the Available Services box on the left, then click Add>> to add it to the

 

Selected Services box on the right. To remove a service, highlight it in the

 

Selected Services box on the right, then click Remove.

Edit Customized

Click the Edit Customized Services link to bring up the screen that you use to

Services

configure a new custom service that is not in the predefined list of services.

Schedule

 

 

 

Day to Apply

Select everyday or the day(s) of the week to apply the rule.

 

 

Time of Day to

Select All Day or enter the start and end times in the hour-minute format to

Apply (24-Hour

apply the rule.

Format)

 

Log

 

 

 

Log Packet Detail

This field determines if a log for packets that match the rule is created (Enable)

Information

or not (Disable). Go to the Log Settings page and select the Access Control

 

logs category to have the Prestige record these logs.

Alert

 

 

 

Send Alert Message

Select the check box to have the Prestige generate an alert when the rule is

to Administrator

matched.

When Matched

 

Back

Click Back to return to the previous screen.

 

 

Apply

Click Apply to save your customized settings and exit this screen.

 

 

Cancel

Click Cancel to exit this screen without saving.

 

 

Delete

Click Delete to remove this firewall rule and return to the Firewall Rule

 

Summary screen.

178

Chapter 14 Firewall Configuration