Prestige 2602HW Series User’s Guide

•Access-Reject

Sent by a RADIUS server rejecting access.

•Access-Accept

Sent by a RADIUS server allowing access.

•Access-Challenge

Sent by a RADIUS server requesting more information in order to allow access. The access point sends a proper response from the user and then sends another Access- Request message.

The following types of RADIUS messages are exchanged between the access point and the RADIUS server for user accounting:

•Accounting-Request

Sent by the access point requesting accounting.

•Accounting-Response

Sent by the RADIUS server to indicate that it has started or stopped accounting.

In order to ensure network security, the access point and the RADIUS server use a shared secret key, which is a password, they both know. The key is not sent over the network. In addition to the shared key, password information exchanged is also encrypted to protect the network from unauthorized access.

6.6.2 EAP Authentication Overview

EAP (Extensible Authentication Protocol) is an authentication protocol that runs on top of the IEEE802.1x transport mechanism in order to support multiple types of user authentication. By using EAP to interact with an EAP-compatible RADIUS server, the access point helps a wireless station and a RADIUS server perform authentication.

Figure 26 EAP Authentication

The details below provide a general description of how IEEE 802.1x EAP authentication works. For an example list of EAP-MD5 authentication steps, see the appendix about IEEE 802.1x.

1The wireless station sends a "start" message to the Prestige.

2The Prestige sends a "request identity" message to the wireless station for identity information.

Chapter 6 Wireless LAN Setup

95