Prestige 2602HW Series User’s Guide

 

Table 132 Menu 26.1 Schedule Set Setup (continued)

 

 

 

 

 

FIELD

DESCRIPTION

 

 

 

 

 

 

Action

Forced On means that the connection is maintained whether or not there is a demand

 

 

call on the line and will persist for the time period specified in the Duration field.

 

 

Forced Down means that the connection is blocked whether or not there is a demand

 

 

call on the line.

 

 

Enable Dial-On-Demandmeans that this schedule permits a demand call on the line.

 

 

Disable Dial-On-Demandmeans that this schedule prevents a demand call on the line.

 

When you have completed this menu, press [ENTER] at the prompt “Press ENTER to Confirm or ESC to Cancel:” to save your configuration, or press [ESC] at any time to cancel.

Once your schedule sets are configured, you must then apply them to the desired remote node(s). Enter 11 from the Main Menu and then enter the target remote node index. Using [SPACE BAR], select PPPoE or PPPoA in the Encapsulation field and then press [ENTER] to make the schedule sets field available as shown next.

Figure 256 Applying Schedule Set(s) to a Remote Node (PPPoE)

Menu 11.1 - Remote Node Profile

Rem Node Name= MyISP

Route= IP

Active= Yes

Bridge= No

Encapsulation= PPPoA

Edit IP/Bridge= No

Multiplexing= LLC-based

Edit ATM Options= No

Service Name= N/A

Edit Advance Options= N/A

Incoming:

Telco Option:

Rem Login=

Allocated Budget(min)= 0

Rem Password= ********

Period(hr)= 0

Outgoing:

Schedule Sets=

My Login= ChangeMe

Nailed-Up Connection= No

My Password= ********

Session Options:

Authen= CHAP/PAP

Edit Filter Sets= No

 

Idle Timeout(sec)= 0

Press ENTER to Confirm or ESC to Cancel:

You can apply up to four schedule sets, separated by commas, for one remote node. Change the schedule set numbers to your preference(s).

Chapter 41 Call Scheduling

401