Prestige 2602HW Series User’s Guide

Figure 127 Initial Screen

Copyright (c) 1994 - 2004 ZyXEL Communications Corp. initialize ch =0, ethernet address: 00:A0:C5:7A:86:D5 initialize ch =1, ethernet address: 00:A0:C5:7A:86:D6 initialize ch =2, ethernet address: 00:A0:C5:7A:86:D7 initialize ch =3, ethernet address: 00:00:00:00:00:00 AUX port init . done

Modem init . inactive

Press ENTER to continue...

22.2.2 Entering the Password

The login screen appears after you press [ENTER], prompting you to enter the password, as shown below.

For your first login, enter the default password “1234”. As you type the password, the screen displays an “X” for each character you type.

Please note that if there is no activity for longer than five minutes after you log in, your Prestige will automatically log you out and display a blank screen. If you see a blank screen, press [ENTER] to bring up the login screen again.

Figure 128 Password Screen

Enter Password : XXXX

22.2.3 Procedure for SMT Configuration via Telnet

The following procedure details how to telnet into your Prestige.

1In Windows, click Start (usually in the bottom left corner), Run and then type "telnet 192.168.1.1" (the default IP address) and click OK.

2Enter “1234” in the Password field.

3After entering the password you will see the main menu.

Please note that if there is no activity for longer than five minutes (default timeout period) after you log in, your Prestige will automatically log you out. You will then have to telnet into the Prestige again.

266

Chapter 22 Introducing the SMT