Prestige 2602HW Series User’s Guide

Figure 146 Menu 11.1 Remote Node Profile

Menu 11.1 - Remote Node Profile

Rem Node Name= MyISP

Route= IP

Active= Yes

Bridge= No

Encapsulation= RFC 1483

Edit IP/Bridge= No

Multiplexing= LLC-based

Edit ATM Options= No

Service Name= N/A

Edit Advance Options= N/A

Incoming:

Telco Option:

Rem Login= N/A

Allocated Budget(min)= N/A

Rem Password= N/A

Period(hr)= N/A

Outgoing:

Schedule Sets= N/A

My Login= N/A

Nailed-Up Connection= N/A

My Password= N/A

Session Options:

Authen= N/A

Edit Filter Sets= No

 

Idle Timeout(sec)= N/A

Press ENTER to Confirm or ESC to Cancel:

In Menu 11.1 – Remote Node Profile, fill in the fields as described in the following table.

Table 99 Menu 11.1 Remote Node Profile

FIELD

DESCRIPTION

 

 

Rem Node Name

Type a unique, descriptive name of up to eight characters for this node.

 

 

Active

Press [SPACE BAR] and then [ENTER] to select Yes to activate or No to

 

deactivate this node. Inactive nodes are displayed with a minus sign –“ in SMT

 

menu 11.

Encapsulation

PPPoA refers to RFC-2364 (PPP Encapsulation over ATM Adaptation Layer 5).

 

If RFC-1483 (Multiprotocol Encapsulation over ATM Adaptation Layer 5) of ENET

 

ENCAP are selected,

 

then the Rem Login, Rem Password, My Login, My Password and Authen

 

fields are not applicable (N/A).

Multiplexing

Press [SPACE BAR] and then [ENTER] to select the method of multiplexing that

 

your ISP uses, either VC-basedor LLC-based.

Service Name

When using PPPoE encapsulation, type the name of your PPPoE service here.

 

 

Incoming:

 

 

 

Rem Login

Type the login name that this remote node will use to call your Prestige. The login

 

name and the Rem Password will be used to authenticate this node.

Rem Password

Type the password used when this remote node calls your Prestige.

 

 

Outgoing:

 

 

 

My Login

Type the login name assigned by your ISP when the Prestige calls this remote

 

node.

My Password

Type the password assigned by your ISP when the Prestige calls this remote

 

node.

Authen

This field sets the authentication protocol used for outgoing calls. Options for this

 

field are:

 

CHAP/PAP – Your Prestige will accept either CHAP or PAP when requested by

 

this remote node.

 

CHAP – accept CHAP (Challenge Handshake Authentication Protocol) only.

 

 

Chapter 28 Remote Node Configuration

297