ZyXEL Communications 2602HW Series Log Commands, Configuring What You Want the Prestige to Log

Prestige 2602HW Series User’s Guide

The following table shows RFC-2408 ISAKMP payload types that the log displays. Please refer to the RFC for detailed information on each type.

Table 197 RFC-2408 ISAKMP Payload Types

LOG DISPLAY	PAYLOAD TYPE
SA	Security Association
PROP	Proposal
TRANS	Transform
KE	Key Exchange
ID	Identification
CER	Certificate
CER_REQ	Certificate Request
HASH	Hash
SIG	Signature
NONCE	Nonce
NOTFY	Notification
DEL	Delete
VID	Vendor ID

Log Commands

Go to the command interpreter interface (Appendix J on page 489 explains how to access and use the commands).

Configuring What You Want the Prestige to Log

1Use the sys logs load command to load the log setting buffer that allows you to configure which logs the Prestige is to record.

2Use sys logs category to view a list of the log categories.

Figure 295 Displaying Log Categories Example

Copyright (c) 1994 - 2004 ZyXEL Communications Corp.
ras> ?
Valid commands are:		ether	wan
sys	exit
wlan	ip	bridge	lan	8021x
radius	8021x	dsp	voiceradius
ras>

3Use sys logs category followed by a log category to display the parameters that are available for the category.

504