Prestige 2602HW Series User’s Guide

 

Table 78 System Status: Show Statistics (continued)

 

 

 

 

 

LABEL

DESCRIPTION

 

 

 

 

 

 

Status

For the WAN port, this displays the port speed and duplex setting if you're using

 

 

 

Ethernet encapsulation and down (line is down), idle (line (ppp) idle), dial

 

 

 

(starting to trigger a call) and drop (dropping a call) if you're using PPPoE

 

 

 

encapsulation.

 

 

 

For a LAN port, this shows the port speed and duplex setting.

 

 

 

 

 

 

TxPkts

This field displays the number of packets transmitted on this port.

 

 

 

 

 

 

RxPkts

This field displays the number of packets received on this port.

 

 

 

 

 

 

Errors

This field displays the number of error packets on this port.

 

 

 

 

 

 

Tx B/s

This field displays the number of bytes transmitted in the last second.

 

 

 

 

 

 

Rx B/s

This field displays the number of bytes received in the last second.

 

 

 

 

 

 

Up Time

This field displays the elapsed time this port has been up.

 

 

 

 

 

 

Collisions

This is the number of collisions on this port.

 

 

 

 

 

 

Voice Statistics

The voice statistics fields apply to calls currently being made or received on a

 

 

 

telephone connected to one of the Prestige's phone ports.

 

 

Phone

This field displays the Prestige's phone port number.

 

 

 

 

 

 

Status

Status This field displays Onhook when the telephone handset is in it’s cradle

 

 

 

and Offhook when telephone handset is out of it’s cradle.

 

 

TxPkts

This field displays a call's number of RTP (Real time Transport Protocol) packets

 

 

 

that have been transmitted. RTP is used to handle voice data transfer. This field

 

 

 

displays 0 again after the call ends.

 

 

RxPkts

This field displays a call's number of RTP packets received. This field displays 0

 

 

 

again after the call ends.

 

 

Tx B/s

This field displays a call's number of bytes of RTP traffic transmitted in the last

 

 

 

second. This field displays 0 again after the call ends.

 

 

Rx B/s

This field displays a call's number of bytes of RTP traffic received in the last

 

 

 

second. This field displays 0 again after the call ends.

 

 

Talk Time

This field displays a call's duration. This field displays 0 again after the call ends.

 

 

 

 

 

 

Poll Interval(s)

Type the time interval for the browser to refresh system statistics.

 

 

 

 

 

 

Set Interval

Click this button to apply the new poll interval you entered in the Poll Interval

 

 

 

field above.

 

 

Stop

Click this button to halt the refreshing of the system statistics.

 

 

 

 

 

21.3 DHCP Table Screen

DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows individual clients to obtain TCP/IP configuration at start-up from a server. You can configure the Prestige as a DHCP server or disable it. When configured as a server, the Prestige provides the TCP/IP configuration for the clients. If set to None, DHCP service will be disabled and you must have another DHCP server on your LAN, or else the computer must be manually configured.

Click Maintenance, and then the DHCP Table tab. Read-only information here relates to your DHCP status. The DHCP table shows current DHCP Client information (including IP Address, Host Name and MAC Address) of all network clients using the DHCP server.

Chapter 21 Maintenance

257