Prestige 2602HW Series User’s Guide

Table 133 Menu 27.1 IPSec Summary (continued)

FIELD

DESCRIPTION

 

 

Secure GW

This is the WAN IP address or the domain name (up to the first 15 characters are

Addr

displayed) of the IPSec router with which you are making the VPN connection. This field

 

displays 0.0.0.0 when you configure the Secure Gateway Address field in SMT 27.1.1

 

to 0.0.0.0.

Select

Press [SPACE BAR] to choose from None, Edit, Delete, Go To Rule, Next Page or

Command

Previous Page and then press [ENTER]. You must select a rule in the next field when

 

you choose the Edit, Delete or Go To commands.

 

Select None and then press [ENTER] to go to the “Press ENTER to Confirm…” prompt.

 

Use Edit to create or edit a rule. Use Delete to remove a rule. To edit or delete a rule,

 

first make sure you are on the correct page. When a VPN rule is deleted, subsequent

 

rules do not move up in the page list.

 

Use Go To Rule to view the page where your desired rule is listed.

 

Select Next Page or Previous Page to view the next or previous page of rules

 

(respectively).

Select Rule

Type the VPN rule index number you wish to edit or delete and then press [ENTER].

 

 

When you have completed this menu, press [ENTER] at the prompt “Press ENTER to Confirm or ESC to Cancel:” to save your configuration, or press [ESC] at any time to cancel.

42.3 IPSec Setup

Select Edit in the Select Command field; type the index number of a rule in the Select Rule field and press [ENTER] to edit the VPN using the menu shown next.

Note: You must also configure menu 27.1.1.1 or menu 27.1.1.2 to fully configure and use a VPN.

406

Chapter 42 VPN/IPSec Setup