Prestige 2602HW Series User’s Guide
CHAPTER 25
Menu 3 LAN Setup
This chapter covers how to configure your wired Local Area Network (LAN) settings.
25.1 LAN Setup
This section describes how to configure the Ethernet using Menu 3 — LAN Setup. From the main menu, enter 3 to display menu 3.
Figure 135 Menu 3 LAN Setup
Menu 3 - LAN Setup
1.LAN Port Filter Setup
2.TCP/IP and DHCP Setup
5. Wireless LAN Setup
Enter Menu Selection Number:
25.1.1 General Ethernet Setup
This menu allows you to specify filter set(s) that you wish to apply to the Ethernet traffic. You seldom need to filter Ethernet traffic; however, the filter sets may be useful to block certain packets, reduce traffic and prevent security breaches.
Figure 136 Menu 3.1 LAN Port Filter Setup
Menu 3.1 - LAN Port Filter Setup Input Filter Sets:
protocol filters= device filters= Output Filter Sets: protocol filters= device filters=
Press ENTER to Confirm or ESC to Cancel:
If you need to define filters, please read Chapter 33 on page 331 first, then return to this menu to define the filter sets.
25.2 Protocol Dependent Ethernet Setup
Depending on the protocols for your applications, you need to configure the respective Ethernet Setup, as outlined below.
Chapter 25 Menu 3 LAN Setup | 281 |