|
| Prestige 2602HW Series User’s Guide |
| Table 9 Internet Access Wizard Setup: Voice Configuration (continued) | |
|
|
|
| LABEL | DESCRIPTION |
|
|
|
| Authentication | Type the password associated with the user name above. You can use up to |
| Password | 95 ASCII Extended set characters. |
| Send Caller ID | Select this check box to show identification information when you make VoIP |
|
| phone calls. Clear the check box to not show identification information when |
|
| you make VoIP phone calls. |
| Back | Click Back to go back to the previous screen. |
|
|
|
| Next | Click Next to continue to the next wizard screen. |
|
|
|
DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows individual clients to obtain TCP/IP configuration from a server. You can configure the Prestige as a DHCP server or disable it. When configured as a server, the Prestige provides the TCP/IP configuration for the clients. If you turn DHCP service off, you must have another DHCP server on your LAN, or else the computer must be manually configured.
3.2.7.1 IP Pool Setup
The Prestige is
Verify the settings in the screen shown next. To change the LAN information on the Prestige, click Change LAN Configurations. Otherwise click Save Settings to save the configuration and skip to the section 3.13.
Chapter 3 Wizard Setup | 73 |