Prestige 2602HW Series User’s Guide

22.2.4 Entering Password

The login screen appears after you press [ENTER], prompting you to enter the password, as shown next.

For your first login, enter the default password "1234". As you type the password, the screen displays an asterisk "*" for each character you type.

Please note that if there is no activity for longer than five minutes after you log in, your Prestige will automatically log you out.

Figure 129 Login Screen

Enter Password : ****

22.3 Navigating the SMT Interface

The SMT (System Management Terminal) is the interface that you use to configure your Prestige.

Several operations that you should be familiar with before you attempt to modify the configuration are listed in the table below.

Table 85 Navigating the SMT Interface

OPERATION

KEY STROKE

DESCRIPTION

 

 

 

Move down to

[ENTER]

To move forward to a submenu, type in the number of the

another menu

 

desired submenu and press [ENTER].

Move up to a

[ESC]

Press [ESC] to move back to the previous menu.

previous menu

 

 

Move to a hidden

Press [SPACE

Fields beginning with "Edit" lead to hidden menus and have a

menu

BAR] to change

default setting of No. Press [SPACE BAR] once to change No

 

No to Yes then

to Yes, then press [ENTER] to go to the "hidden" menu.

 

press [ENTER].

 

Move the cursor

[ENTER] or [UP]/

Within a menu, press [ENTER] to move to the next field. You

 

[DOWN] arrow

can also use the [UP]/[DOWN] arrow keys to move to the

 

keys.

previous and the next field, respectively.

Entering

Type in or press

You need to fill in two types of fields. The first requires you to

information

[SPACE BAR],

type in the appropriate information. The second allows you to

 

then press

cycle through the available choices by pressing [SPACE BAR].

 

[ENTER].

 

Required fields

<? > or

All fields with the symbol <?> must be filled in order to be able

 

ChangeMe

to save the new configuration.

 

 

All fields with ChangeMe must not be left blank in order to be

 

 

able to save the new configuration.

N/A fields

<N/A>

Some of the fields in the SMT will show a <N/A>. This symbol

 

 

refers to an option that is Not Applicable.

Chapter 22 Introducing the SMT

267