ZyXEL Communications 2602HW Series Displaying Logs

Prestige 2602HW Series User’s Guide

Figure 296 Displaying Log Parameters Example

ras> sys logs category access

Usage: [0:none/1:log/2:alert/3:both] ras>

4Use sys logs category followed by a log category and a parameter to decide what to record.

Use 0 to not record logs for that category, 1 to record only logs for that category, 2 to record only alerts for that category, and 3 to record both logs and alerts for that category. Not every parameter is available with every category.

5Use the sys logs save command to store the settings in the Prestige (you must do this in order to record logs).

Displaying Logs

•Use the sys logs display command to show all of the logs in the Prestige’s log.

•Use the sys logs category display command to show the log settings for all of the log categories.

•Use the sys logs display [log category] command to show the logs in an individual Prestige log category.

•Use the sys logs clear command to erase all of the Prestige’s logs.

505