Prestige 2602HW Series User’s Guide

CHAPTER 24

Menu 2 WAN Backup Setup

This chapter describes how to configure traffic redirect and dial-backup using menu 2 and 2.1.

24.1 Introduction to WAN Backup Setup

This chapter explains how to configure the Prestige for traffic redirect connections.

24.2 Configuring WAN Backup in Menu 2

From the main menu, enter 2 to open menu 2.

Figure 133 Menu 2 WAN Backup Setup

Menu 2 - Wan Backup Setup

Check Mechanism = DSL Link

Check WAN IP Address1 = 0.0.0.0

Check WAN IP Address2 = 0.0.0.0

Check WAN IP Address3 = 0.0.0.0

KeepAlive Fail Tolerance = 0

Recovery Interval(sec) = 0

ICMP Timeout(sec) = 0

Traffic Redirect = No

Press ENTER to Confirm or ESC to Cancel:

The following table describes the fields in this menu.

Table 91 Menu 2 WAN Backup Setup

FIELD

DESCRIPTION

 

 

Check Mechanism

Press [SPACE BAR] and then press [ENTER] to select the method that the

 

Prestige uses to check the DSL connection.

 

Select DSL Link to have the Prestige check the DSL connection’s physical

 

layer. Select ICMP to have the Prestige periodically ping the IP addresses

 

configured in the Check WAN IP Address fields.

Check WAN IP

Configure this field to test your Prestige's WAN accessibility. Type the IP

Address1-3

address of a reliable nearby computer (for example, your ISP's DNS server

 

address). When using a WAN backup connection, the Prestige periodically

 

pings the addresses configured here and uses the other WAN backup

 

connection (if configured) if there is no response.

Chapter 24 Menu 2 WAN Backup Setup

277