Prestige 2602HW Series User’s Guide

Table 135 Menu 27.1.1.1 IKE Setup (continued)

FIELD

DESCRIPTION

 

 

Key Group

You must choose a key group for phase 1 IKE setup. DH1 (default) refers to Diffie-

 

Hellman Group 1 a 768 bit random number. DH2 refers to Diffie-Hellman Group 2 a

 

1024 bit (1Kb) random number.

Phase 2

 

 

 

Active Protocol

Press [SPACE BAR] to choose from ESP or AH and then press [ENTER]. See earlier

 

for a discussion of these protocols.

Encryption

Press [SPACE BAR] to choose from NULL, DES, 3DES or AES and then press

Algorithm

[ENTER]. Select NULL to set up a tunnel without encryption.

Authentication

Press [SPACE BAR] to choose from SHA1 or MD5 and then press [ENTER].

Algorithm

 

SA Life Time

Define the length of time before an IPSec Security Association automatically

(Seconds)

renegotiates in this field. It may range from 60 to 3,000,000 seconds (almost 35 days).

Encapsulation

Press [SPACE BAR] to choose from Tunnel mode or Transport mode and then

 

press [ENTER]. See earlier for a discussion of these.

Perfect Forward

Perfect Forward Secrecy (PFS) is disabled (None) by default in phase 2 IPSec SA

Secrecy (PFS)

setup. This allows faster IPSec setup, but is not so secure. Press [SPACE BAR] and

 

choose from DH1 or DH2 to enable PFS. DH1 refers to Diffie-Hellman Group 1 a 768

 

bit random number. DH2 refers to Diffie-Hellman Group 2 a 1024 bit (1Kb) random

 

number (more secure, yet slower).

When you have completed this menu, press [ENTER] at the prompt “Press ENTER to Confirm or ESC to Cancel:” to save your configuration, or press [ESC] at any time to cancel.

42.5 Manual Setup

You only configure Menu 27.1.1.2 – Manual Setup when you select Manual in the Key Management field in Menu 27.1.1 – IPSec Setup. Manual key management is useful if you have problems with IKE key management.

42.5.1 Active Protocol

This field is a combination of mode and security protocols used for the VPN. See the Web Configurator part on VPN for more information on these parameters.

Table 136 Active Protocol: Encapsulation and Security Protocol

MODE

SECURITY PROTOCOL

 

 

Tunnel

ESP

 

 

Transport

AH

 

 

42.5.2 Security Parameter Index (SPI)

To edit this menu, move the cursor to the Edit Manual Setup field in Menu 27.1.1 – IPSec Setup press [SPACE BAR] to select Yes and then press [ENTER] to go to Menu 27.1.1.2 – Manual Setup.

412

Chapter 42 VPN/IPSec Setup