Prestige 2602HW Series User’s Guide

Figure 173 Menu 4 Internet Access & NAT Example

Menu 4 - Internet Access Setup

ISP's Name= MyISP

Encapsulation= RFC 1483

Multiplexing= LLC-based

VPI #= 8

VCI #= 35

ATM QoS Type= UBR

Peak Cell Rate (PCR)= 0

Sustain Cell Rate (SCR)= 0

Maximum Burst Size (MBS)= 0

My Login= N/A

My Password= N/A

ENET ENCAP Gateway= N/A

IP Address Assignment= Static

IP Address= 0.0.0.0

Network Address Translation= SUA Only

Address Mapping Set= N/A

Press ENTER to Confirm or ESC to Cancel:

From menu 4, choose the SUA Only option from the Network Address Translation field. This is the Many-to-Onemapping discussed in Section 31.5 on page 321. The SUA Only read-only option from the Network Address Translation field in menus 4 and 11.3 is specifically pre-configured to handle this case.

31.5.2 Example 2: Internet Access with an Inside Server

Figure 174 NAT Example 2

In this case, you do exactly as above (use the convenient pre-configured SUA Only set) and also go to menu 15.2 to specify the Inside Server behind the NAT as shown in the next figure.

322

Chapter 31 Network Address Translation (NAT)