ES-2048 User’s Guide

Table 27 Broadcast Storm Control (continued)

LABEL

DESCRIPTION

 

 

*

Settings in this row apply to all ports.

 

Use this row only if you want to make some settings the same for all ports. Use this

 

row first to set the common settings and then make adjustments on a port-by-port

 

basis.

 

Note: Changes in this row are copied to all the ports as soon as you

 

make them.

Broadcast (pkt/s)

Select this option and specify how many broadcast packets the port receives per

 

second.

Multicast (pkt/s)

Select this option and specify how many multicast packets the port receives per

 

second.

DLF (pkt/s)

Select this option and specify how many destination lookup failure (DLF) packets the

 

port receives per second.

Apply

Click Apply to save your changes to the switch’s run-time memory. The switch loses

 

these changes if it is turned off or loses power, so use the Save link on the top

 

navigation panel to save your changes to the non-volatile memory when you are

 

done configuring.

Cancel

Click Cancel to reset the fields.

Chapter 13 Broadcast Storm Control

119