ES-2048 User’s Guide

Table 73

Command Summary: Configuration Mode (continued)

 

 

 

 

 

 

COMMAND

 

DESCRIPTION

PRIVILEGE

 

 

 

 

 

 

 

 

vlan-stacking

 

Disables VLAN stacking on the

13

 

 

 

 

switch.

 

 

 

ssh

key

Disables the secure shell server

13

 

 

 

<rsa1rsadsa>

encryption key. Your switch

 

 

 

 

 

supports SSH versions 1 and 2

 

 

 

 

 

using RSA and DSA

 

 

 

 

 

authentication.

 

 

 

 

known-hosts

Removes all remote hosts.

13

 

 

 

known-hosts

Removes the specified remote

13

 

 

 

<host-ip>

host from the list of all known

 

 

 

 

 

hosts.

 

 

 

 

known-hosts

Removes remote known hosts

13

 

 

 

<host-ip>

with the specified public key

 

 

 

 

[1024ssh-

(1024-bit RSA1, RSA or DSA).

 

 

 

 

rsassh-dsa]

 

 

 

 

https

timeout

Resets the session timeout to the

13

 

 

 

 

default of 300 seconds.

 

 

 

multi-login

 

Disables another administrator

14

 

 

 

 

from logging into Telnet.

 

 

 

cluster

 

Disables cluster management on

13

 

 

 

 

the switch.

 

 

 

cluster member

<mac-address>

Removes the cluster member.

13

 

 

mvr

<vlan-id>

Disables MVR on the switch.

13

 

 

fe-spq

 

Disables Strict Priority Queuing

13

 

 

 

 

on the switch.

 

 

 

syslog

 

Disables syslog logging.

13

 

 

 

server <ip-

Disables syslog logging to the

13

 

 

 

address>

specified syslog server.

 

 

 

 

server <ip-

Enables syslog logging to the

13

 

 

 

address>

specified syslog server.

 

 

 

 

inactive

 

 

 

 

 

type [type]

DIsables syslog logging for the

13

 

 

 

 

specified log type (sys, link,

 

 

 

 

 

config, error or report).

 

vlan

 

<1-4094>

 

Enters the VLAN configuration

13

 

 

 

 

mode. See Section 31.11.5 on

 

 

 

 

 

page 237 for more information.

 

vlan-type

<802.1qport-

 

Specifies the VLAN type.

13

 

 

based>

 

 

 

igmp-

 

 

 

Enables IGMP snooping.

13

snooping

 

 

 

 

 

 

8021p-priority

<0-7>

Sets the priority level in outgoing

13

 

 

 

 

igmp control packets.

 

 

 

host-timeout

<1-16711450>

Sets the host timeout value.

13

 

 

leave-timeout

<1-16711450>

Sets the leave timeout value

13

Chapter 31 Introducing Commands

227