ES-2048 User’s Guide

The following table describes the labels in this screen.

Table 32 Link Aggregation Control Protocol: Configuration

LABEL

DESCRIPTION

 

 

Link Aggregation Control Protocol

 

 

Active

Select this checkbox to enable Link Aggregation Control Protocol (LACP).

 

 

System

LACP system priority is a number between 1 and 65,535. The switch with the lowest

Priority

system priority (and lowest port number if system priority is the same) becomes the

 

LACP “server”. The LACP “server” controls the operation of LACP setup. Enter a

 

number to set the priority of an active port using Link Aggregate Control Protocol

 

(LACP). The smaller the number, the higher the priority level.

Group ID

The field identifies the link aggregation group, that is, one logical link containing

 

multiple ports.

Active

Select this option to activate a trunk group.

 

 

Dynamic

Select this check box to enable LACP for a trunk.

(LACP)

 

Port

This field displays the port number.

 

 

*

Settings in this row apply to all ports.

 

Use this row only if you want to make some settings the same for all ports. Use this row

 

first to set the common settings and then make adjustments on a port-by-port basis.

 

Note: Changes in this row are copied to all the ports as soon as you

 

make them.

Group

Select the trunk group to which a port belongs.

 

 

LACP Timeout

Timeout is the time interval between the individual port exchanges of LACP packets in

 

order to check that the peer port in the trunk group is still up. If a port does not respond

 

after three tries, then it is deemed to be “down” and is removed from the trunk. Set a

 

short timeout (one second) for busy trunked links to ensure that disabled ports are

 

removed from the trunk group as soon as possible.

 

Select either 1 second or 30 seconds.

 

 

Apply

Click Apply to save your changes to the switch’s run-time memory. The switch loses

 

these changes if it is turned off or loses power, so use the Save link on the top

 

navigation panel to save your changes to the non-volatile memory when you are done

 

configuring.

Cancel

Click Cancel to reset the fields.

Chapter 15 Link Aggregation

129