ZyXEL Communications ES-2048 admin, Logins, Access Control

ES-2048 User’s Guide

Note: It is highly recommended that you change the default administrator password (1234).

•A non-administrator (username is something other than admin) is someone who can view but not configure switch settings.

Click Access Control from the navigation panel and then click Logins from this screen.

Figure 84 Access Control: Logins

The following table describes the labels in this screen.

Table 56 Access Control: Logins

LABELDESCRIPTION

Administrator

This is the default administrator account with the “admin” user name. You cannot change the default administrator user name. Only the administrator has read/write access.

Old Password	Type the existing system password (1234 is the default password when
	shipped).
New Password	Enter your new system password.
Retype to confirm	Retype your new system password for confirmation

Edit Logins

You may configure passwords for up to four users. These people have read-only access. You can give users higher privileges via the CLI. For more information on assigning privileges see Chapter 31 on page 211.

User Name	Set a user name (up to 32 ASCII characters long).
Password	Enter your new system password.
Retype to confirm	Retype your new system password for confirmation

Chapter 24 Access Control 181