ES-2048 User’s Guide

Table 72 Command Summary: Enable Mode (continued)

COMMAND

 

 

DESCRIPTION

PRIVILEGE

 

 

 

 

 

 

 

interface port-

Resets to the factory default

13

 

 

channel <port-

settings on a per port basis and

 

 

 

list>

optionally on a per feature

 

 

 

configuration basis.

 

 

 

[bandwidth-

 

 

 

limit...]

 

 

baudrate

<12345>

 

Changes the console port speed.

13

 

 

 

Choices are 1 (9600), 2 (19200),

 

 

 

 

3(38400), 4 (57600) and 5

 

 

 

 

(115200).

 

boot

config <index>

 

Restarts the system with the

13

 

 

 

specified configuration file.

 

reload

config <index>

 

Restarts the system and use the

13

 

 

 

specified configuration file.

 

write

memory

 

Saves current configuration to the

13

 

 

 

configuration file the switch is

 

 

 

 

currently using.

 

 

 

<index>

Saves current configuration to the

13

 

 

 

specified configuration file on the

 

 

 

 

switch.

 

copy

tftp flash <ip>

 

Restores firmware via TFTP.

13

 

<remote-file>

 

 

 

 

tftp config

 

Restores configuration with the

13

 

<index> <ip>

 

specified filename from the

 

 

<remote-file>

 

specified TFTP server.

 

 

 

 

 

 

running-config

 

Backs up running configuration to

13

 

tftp <ip>

 

the specified TFTP server with

 

 

<remote-file>

 

the specified file name.

 

 

 

 

 

 

running-config

 

Clones (copies) the attributes

13

 

interface port-

 

from the specified port to other

 

 

channel <port>

 

ports.

 

 

<port-list>

 

 

 

 

running-config

[bandwidth-

Copies the specified attributes

13

 

interface port-

limit ....]

from one port to other ports.

 

 

channel <port>

 

 

 

 

<port-list>

 

 

 

cable-

<port-list>

 

Performs a basic connectivity test

13

diagnostic

 

 

on the ports. Displays “Ok” if

 

s

 

 

connector is inserted in the port,

 

 

 

“Open” if no connector is inserted

 

 

 

 

in the port or “Unknown” if this

 

 

 

 

test cannot determine the status.

 

ping

<iphost-name>

 

Sends Ping request to an

13

 

 

 

Ethernet device.

 

 

 

[vlan <vlan-

Sends Ping request to an

13

 

 

id>][..]

Ethernet device in the specified

 

 

 

 

VLAN(s).

 

 

help

 

Displays command help

13

 

 

 

information.

 

Chapter 31 Introducing Commands

223