33.4.2 Resetting Commands
Use the no command to reset switch settings to their default values.
Syntax:
no https timeout
Resets the https session timeout to default.
An example is shown next. The session timeout is reset to 300 seconds.
sysname(config)# no https timeout Cache timeout 300
33.4.3 Re-enable commands
The no command can also be used to
Syntax:
no ip route <ip> <mask> inactive
where |
|
<ip> <mask> inactive | = |
| subnet mask. |
An example is shown next. |
|
•Enable the IP route with the IP address of 192.168.11.1 and subnet mask of 255.255.255.0. This ip route must have already been created and made inactive prior to
sysname(config)# no ip route 192.168.11.1 255.255.255.0 inactive
33.4.4 Other Examples of no Commands
In some cases the no command can disable a feature, disable an option of a feature or disable a feature on a port by port basis.
Chapter 33 Configuration Mode Commands | 253 |