ES-2048 User’s Guide

Figure 93 Access Control: Remote Management

The following table describes the labels in this screen.

Table 58 Access Control: Remote Management

LABEL

DESCRIPTION

 

 

Entry

This is the client set index number. A “client set” is a group of one or more “trusted

 

computers” from which an administrator may use a service to manage the switch.

Active

Select this check box to activate this secured client set. Clear the check box if you

 

wish to temporarily disable the set without deleting it.

Start Address

Configure the IP address range of trusted computers from which you can manage this

End Address

switch.

The switch checks if the client IP address of a computer requesting a service or

 

 

protocol matches the range set here. The switch immediately disconnects the session

 

if it does not match.

Telnet/FTP/

Select services that may be used for managing the switch from the specified trusted

HTTP/ICMP/

computers.

SNMP/SSH/

 

HTTPS

 

Apply

Click Apply to save your changes to the switch’s run-time memory. The switch loses

 

these changes if it is turned off or loses power, so use the Save link on the top

 

navigation panel to save your changes to the non-volatile memory when you are done

 

configuring.

Cancel

Click Cancel to reset the fields.

Chapter 24 Access Control

189