ES-2048 User’s Guide

Table 70 Command Interpreter Mode Summary (continued)

 

 

 

 

 

 

 

MODE

.DESCRIPTION

HOW TO LOGIN/

PROMPT

 

ACCESS

 

 

 

 

 

Config

Commands available in this mode

Type config in

sysname(config)#

 

 

allow you to configure settings that

enable mode.

 

 

 

affect the switch globally.

 

 

 

Command modes that follow are sub-modes of the config mode and can only be accessed from within the config

 

mode.

 

 

 

 

Config-vlan

This is a sub-mode of the config mode

Type vlan followed by

sysname(config-vlan)#

 

 

and allows you to configure VLAN

a number (between 1 to

 

 

 

settings.

4094). For example,

 

 

 

 

vlan 10 to configure

 

 

 

 

settings for VLAN 10.

 

 

Config-interface

This is a sub-mode of the config mode

Type interface

sysname(config-

 

 

and allows you to configure port

port-channel

interface)#

 

 

related settings.

followed by a port

 

 

 

 

number. For example,

 

 

 

 

interface port-

 

 

 

 

channel 8 to

 

 

 

 

configure port 8 on the

 

 

 

 

switch.

 

 

Config-mvr

This is a sub-mode of the config mode

To enter MVR mode,

sysname(config-mvr)#

 

 

and allows you to configure multicast

enter mvr followed by

 

 

 

VLAN settings.

a VLAN ID (between 1

 

 

 

 

and 4094). For

 

 

 

 

example, enter mvr 2

 

 

 

 

to configure multicast

 

 

 

 

settings on VLAN 2.

 

 

Enter exit to quit from the current mode or enter logout to exit the command interpreter.

31.8 Getting Help

The system includes a help facility to provide you with the following information about the commands:

•List of available commands under a command group.

•Detailed descriptions of the commands.

Chapter 31 Introducing Commands

215