ES-2048 User’s Guide

group name <name-str>

start-address <ip>

end-address <ip>

=A name to identify the MVR IP multicast group.

=Specifies the starting IP multicast address of the multicast group in dotted decimal notation.

=Specifies the ending IP multicast address of the multicast group in dotted decimal notation. Enter the same IP address as the start- address if you want to configure only one IP address for the multicast group.

•Enter MVR mode. Create a multicast VLAN with the name multiVlan and the VLAN ID of 3.

•Specify source ports 2, 3, 5 and receiver ports 6-8.

•Specify dynamic mode for the multicast group.

•Configure MVR multicast group addresses by the name of ipgroup.

•Exit MVR mode.

See the following example.

sysname(config)# mvr 3 name multivlan sysname(config-mvr)# source-port 2,3,5 receiver-port 6-8 sysname(config-mvr)# mode dynamic

sysname(config-mvr)# group ipgroup start-address 224.0.0.1 end-address 224.0.0.255

sysname(config-mvr)# exit

280

Chapter 36 Multicast VLAN Registration Commands